Dr. Memoon Sajid

EDUCATION:

• Post Doctorate (Mechatronics Engineering) 2018, Jeju National University, Korea
• M.S. Leading to Ph.D. (Mechatronics Engineering) 2017, Jeju National University, Korea
• B.S. (Electronic Engineering) 2012, Ghulam Ishaq Khan Institute of Engineering Sciences and Technology, Pakistan

EXPERIENCE:

1. Associate Professor, Faculty of Electrical Engineering, Ghulam Ishaq Khan Institute, Topi (Jan 2024 to Present)
2. Assistant Professor, Faculty of Electrical Engineering, Ghulam Ishaq Khan Institute, Topi (Jan 2019 to Dec 2023)
3. Assistant Professor, Department of Electrical Engineering, COMSATS University, Islamabad (Sept 2018 to Jan 2019)
4. Post Doctorate Research Professor, Advanced Micro Mechatronics Lab, Jeju National University, Korea (Jan 2018 to Sept 2018)
5. Electronic Engineer, Faculty of Electronic Engineering, Ghulam Ishaq Khan Institute, Topi (Aug 2012 to Feb 2014)

RESEARCH INTERESTS:

1. Printed ELectronics
2. Sensors and Actuators
3. Device Fabrication
4. Characterization Systems
5. Instrumentation & Signal Conditioning Circuit Design

COURSES OFFERED:

1. EE-221 Digital Logic Design
2. EE-222 Microprocessor Systems
3. EE-231 Electronic Devices & Circuits (E-1)
4. EE-332 Electronic Circuits Design (E-2)
5. EE-314 Electrical Instrumentation & Measurements
6. EE-425 Digital Integrated Circuit Design
7. EE-432 Industrial Electronics
8. CE-324 Microprocessor Interfacing
9. ES-314 Microcontroller Interfacing
10. EE-681 Biosensors & Bioelectronics

FUNDED PROJECTS AS PI/CO-PI:

GRADUATE SUPERVISIONS:

PUBLICATIONS (TOTAL : 53)

Books/Chapters:

B-2. Chapter “Sensors and Actuators: Selection and Interfacing”. Functional Reverse Engineering of Strategic & Non-Strategic Machine Tools (59-77). ISBN9780367808235. CRC Press. Memoon Sajid^1*, Mazhar Javed. 2021

B-1. Chapter “Selection of Sensors, Transducers, and Actuators”. Functional Reverse Engineering of Machine Tools (29-51). ISBN 9780367078034. CRC Press. Memoon Sajid^1*, J. Z. Gul, K. H. Choi. 2019

SCI Journal Publications (IF: 126 (JCR 2023); Citations: 1530+, h-index: 20, i10-index: 27):

J-29. Fabrication, Comparison, Optimization, and Applications of Conductive Graphene Patterns Induced via CO₂ and Diode Lasers. Memoon Sajid^1*, Faisal Saeed Awan, Mazhar J., Zarak J. Khattak, Gohar H., S. Farhad Shah, Khalid Rahman, and Mohsin Saleem. Lasers in Manufacturing and Materials Processing: 2023 DOI: 10.1007/s40516-023-00209-6. (CS: 3.7)

J-28. Progress and Future of Relative Humidity Sensors: A Review from Materials Perspective. Memoon Sajid11*, Zarak J. Khattak, Khalid Rahman, Gul Hassan, and Kyung Hyun Choi. Bulletin of Materials Science: 45:238 2022. (IF: 1.88)

J-27. Mass Producible 2D Nano-composite based Temperature Independent All-Printed Relative Humidity Sensor. Zarak Jamal Khattak, Memoon Sajid2*, Mazhar Javed, Hafiz M. Zeeshan Rizvi, Faisal Saeed Awan. ACS Omega: 2022, DOI: 10.1021/acsomega.2c00850: (IF: 4.13)

J-26. Fabrication of temperature and humidity independent AgNP’s-Carbon composite based strain sensor through additive manufacturing process. Nadeem Iqbal, Memoon Sajid2, K. Rahman, T. A. Qausaria, M. Shakeel, S. Ahmad, and M. Amin. 3D Printing and Additive Manufacturing: Volume: 21, Issue: 13, July1, 1 2021, PP 14906-14914  (IF: 5.36)

J-25. Facile and low cost temperature compensated humidity sensor and signal conditioning system. Mazhar Javed, Memoon Sajid1*, H. M. Zeeshan Yousaf, Gul Hassan, Hasan Mahmood. IEEE Sensors: DOI 10.1109/JSEN.2021.3073957 (IF: 4.32)

J-24. Highly sensitive wide range linear integrated temperature compensated humidity sensors fabricated using Electrohydrodynamic printing and electrospray deposition. H.M. Zeeshan Yousaf, S. W. Kim, Gul Hassan, K. Karimov, K. H. Choi, and Memoon Sajid*. Sensors & Actuators-B: Volume 308, 1 April 2020, 127680 (IF: 9.22)

J-23. A fluorescent lateral flow biosensor for quantitative detection of Vaspin using up converting nanoparticles. Muhsin Ali, Memoon Sajid², M. A. U. Khalid, S. W. Kim, j. H. Lim, D. Huh, K. H. Choi. Spectrochimica Acta Part A: 1386-1425. Volume 226, 5 February 2020, 117610. (IF: 4.83)

J-22. Highly Sensitive and Full Range Humidity Sensor using PEDOT:PSS, Methyl Red, and Graphene Oxide Materials. Gul Hassan, Memoon Sajid², and C. Choi. Nature Scientific Reports: 9:15227 | DOI: 10.1038/s41598-019-51712-w. 2019 (IF: 5.00).

J-21. 3D printed highly flexible strain sensor based on TPU-Graphene composite for feedback of high speed robotic applications. J. Z. Gul, Memoon Sajid², K. H. Choi. Journal of Materials Chemistry C: Issue 16, 2019. DOI: 10.1039/C8TC03423K (IF: 8.07)

J-20. Quantitative detection of uric acid through ZnO quantum dots based highly sensitive electrochemical biosensor. M. Ali, I. Shah, S. W. Kim, Memoon Sajid⁴, J. H. Lim, K. H. Choi. Sensors and Actuators-A: Volume 283, 1 November 2018, Pages 282-290. (IF: 4.29)

J-19. Encapsulation of polyvinyl alcohol based flexible temperature sensor through spatial atmospheric atomic layer deposition system to enhance its lifetime. Soo Wan Kim^†, M. M. Rehman^†, Memoon Sajid², M. M. Ur Rehman, J. Z. Gul, Jeongdai Jo, K. H. Choi*. Thin Solid Films: Volume 673, 1 March 2019, Pages 44-51. (IF: 2.36)

J-18. Significance of encapsulating organic temperature sensors through spatial atmospheric atomic layer deposition for protection against humidity. M. M. ur Rehman, M. M. Rehman, Memoon Sajid³, J. W. Lee, K. H. Na, K. H. Choi*. Journal of Materials Science-Materials in Electronics: September 2018, Volume 29, Issue 17, pp 14396–14405 (IF: 2.78)

J-17. Wide range highly sensitive relative humidity sensor based on series combination of MoS₂ and PEDOT:PSS sensors array. G. U. Siddiqui^1†, Memoon Sajid^1†, J. Ali, S. W. Kim, Y. H. Doh, K. H. Choi*. Sensors & Actuators-B: Volume 266, 1 August 2018, Pages 354-363 (IF: 9.22)

J-16. Drop-on-demand Electrohydrodynamic printing of high resolution conductive micro patterns for MEMS repairing. Y. J. Yang, H. C. Kim, Memoon Sajid³, S. W. Kim, S. Aziz, Y. S. Choi, K. H. Choi*. International Journal of precision engineering and manufacturing 19, pages811–819, 2018 (IF: 2.04)

J-15. Liquid assisted exfoliation of 2D hBN flakes and their dispersion in PEO to fabricate highly specific and stable linear humidity sensors. Memoon Sajid¹, H. B. Kim, J. H. Lim, K. H. Choi. Journal of Materials Chemistry C: 2018, 6, 1421-1432 (IF: 8.07)

J-14. 3D printing for soft robotics: A review. J. Z. Gul, Memoon Sajid², M. M. Rehman, G. U. Siddiqui, I. Shah, Y. S. Kim, K. H. Choi^*. Science and Technology of Advanced Materials: Mar 8; 19(1): 243-262, 2018.1431862 (IF: 7.82)

J-13. Development of 3D printed embedded temperature sensor for both terrestrial and aquatic environmental monitoring robots. Memoon Sajid¹, J. Z. Gul, S. W. Kim, H. B. Kim, K. H. Na, K. H. Choi. 3D Printing and Additive Manufacturing: Vol. 5, No. 2, 10.1089/3dp.2017.0092 (IF: 5.36)

J-12. Thermally modified amorphous polyethylene oxide thin films as highly sensitive linear humidity sensors. Memoon Sajid¹, G. U. Siddiqui, S. W. Kim, K. H. Na, K. H. Choi^*. Sensors and Actuators-A: Volume 265, 1 October 2017, Pages 102-110 (IF: 4.29)

J-11. Linear humidity sensor fabrication using bi-layered active region of transition metal carbide and polymer thin films. H. B. Kim^1†, Memoon Sajid^1†, K. T. Kim, K. H. Na, K. H. Choi^*. Sensors and Actuators-B: Volume 252, November 2017, Pages 725-734 (IF: 9.22)

J-10. All-printed highly sensitive 2D MoS₂ based multi-reagent immunosensor for smartphone based point-of-care diagnosis. Memoon Sajid^1†, A. Kamel^†, G. U. Siddiqui, H. B. Kim, S. W. Kim, J. B. Ko, Y. K. Lim, K. H. Choi^*. Nature Scientific Reports: 2017; 7: 5802. DOI: 10.1038/s41598-017-06265-1 (IF: 5.00)

J-09. Linear bi-layer humidity sensor with tunable response using combinations of molybdenum carbide with polymers. Memoon Sajid^1†, H. B. Kim^1†, G. U. Siddiqui, K. H. Choi^*. Sensors and Actuators-A: Volume 262, 1 August 2017, Pages 68-77 (IF: 4.29)

J-08. Highly sensitive BEHP-co-MEH:PPV + Poly(acrylic acid) partial sodium salt based relative humidity sensor. Memoon Sajid¹; H. B. Kim; Y. J. Yang; J. D. Jo; K. H. Choi^*. Sensors and Actuators-B: Volume 246, July 2017, Pages 809-818 (IF: 9.22)

J-07. Highly sensitive human motion sensor based on ZnSnO3/PVDF composite. Y. J. Yang^1†, S. Aziz^1†, M. Mehdi, Memoon Sajid⁴, J. Srikanth, K. H. Choi^*. Journal of Electronic Materials: July 2017, Volume 46, Issue 7, pp 4172–4179 (IF: 2.05)

J-06. Bio-compatible organic humidity sensor transferred to arbitrary surfaces fabricated using single-cell thick onion membrane as both the substrate and sensing layer. Memoon Sajid¹, S. Aziz, G. B. Kim, S. W. Kim, J. D. Jo, K. H. Choi^*. Nature Scientific Reports: 6, Article number: 30065 (2016), DOI: 10.1038/srep30065 (IF: 5.00)

J-05. Effect of Humidity on the NiPc Based Organic Photo Field Effect Transistor. KH.S. Karimov^*, M. Saleem, N. Ahmed, M.M. Tahir, M.S. Zahid, M. Sajid⁶, M.M. Bashir. Proceedings of the Romanian Academy, Series A, Volume 17, Number 1/2016, pp. 84–89 (IF: 0.73)

J-04. Highly Stable Flex Sensors Fabricated through Mass Production Roll-to-Roll Micro-gravure Printing System. Memoon Sajid¹, H. W. Dang, K. H. Na, K. H. Choi^*. Sensors and Actuators-A: Volume 236, 1 December 2015, Pages 73-81 (IF: 4.29)

J-03. Hybrid Surface Acoustic Wave Electrohydrodynamic Atomization (SAW-EHDA) for the Development of Functional Thin Films. K. H. Choi^*, H. B. Kim, K. Ali, Memoon Sajid³, G. U. Siddiqui, D. E. Chang, H. C. Kim, J. B. Ko, H. W. Dang, and Y. H. Doh. Nature Scientific Reports: 5, Article number: 15178 (2015) DOI: 10.1038/srep15178 (IF: 5.00)

J-02. Flexible large area organic light emitting diode fabricated by Electrohydrodynamic atomization technique. Memoon Sajid¹, M. Zubair, Y. H. Doh, K. H. Na, K. H. Choi^*. Journal of Materials Science-Materials in Electronics: September 2015, Volume 26, Issue 9, pp 7192–7199 (IF: 2.78)

J-01. Wide range high speed relative humidity sensor based on PEDOT:PSS–PVA composite on an IDT printed on piezoelectric substrate. K. H. Choi^*, Memoon Sajid¹, S. Aziz, and B. S. Yang. Sensors and Actuators-A: Volume 228, 1 June 2015, Pages 40-49 (IF: 4.29)

International Conferences:

C-22.   Painting an Ultra-low Cost, biocompatible, disposable Graphite-on Paper based Strain Sensor for Wearable Human Motion Monitoring. A. Arshad, Memoon Sajid, M. Zubair, M. Q. Mehmood, Kashif Riaz. 18th-IBCAST-2021, Bhurban, Pakistan.

C-21.     Facile and Cost Effective Paper Based Triboelectric Nanogenerators for Self Powered Environmental Sensing System. (Oral + Proceedings) M. Umaid Bukhari, Memoon Sajid, M. Qasim Mehmood, Muhammad Zubair, Kashif Riaz. UCET 2020 (IEEE), Glasgow, United Kingdom.

C-18.     Simple and low-cost triboelectric Nano generator (TENG) for resource-limited environment. (Oral) M. Umaid Bukhari, Kashif Riaz, Tauseef Tauqeer, Memoon Sajid. ICRAI 2019, Rawalpindi, Pakistan.

C-17.     Fabrication of 3D printed smart key with embedded sensor and electronics using a multi-material smart 3D printer. (Oral) Memoon Sajid¹, Soo Wan Kim, Kyung Hyun Choi, DTAS 2018, Tokyo, Japan.

C-16.     Single layer printed photodetector based on MEH:PPV-MoS₂ quantum dots composite. (Oral + Proceedings) Memoon Sajid¹, Soo Wan Kim, Hyun Bum Kim, Kyung Hyun Choi, ICMAE 978-1-5386-7228-0/18 IEEE 2018, Budapest, Hungary.

C-15.     Relative humidity sensor fabrication with PEDOT:PSS-PEO composite on piezoelectric substrate using SAW-EHDA hybrid thin film deposition system. (Oral) Hyun Bum Kim, Memoon Sajid², Kyung Hyun Choi, ICMEAE 2018, Nagoya, Japan.

C-14.     High resolution drop-on-demand based Electrohydrodynamic printing of conductive silver micro patterns. (Oral + Proceedings) Memoon Sajid¹, Soo Wan Kim, Jae Wook Lee, Kyung Hyun Choi, Yang Hoi Doh, IRES ICIET-339 2018, Istanbul, Turkey.

C-13.     Highly sensitive humidity sensor based on 2D transition metal carbo-nitride and polymer composite. (Oral) Memoon Sajid¹, Hyun Bum Kim, Soo Wan Kim, Jae Wook Lee, Kyung Hyun Choi, ICETA 2017, Fukuoka, Japan.

C-12.     Invited Speaker at International Conference on Smart World (ICSW) 2017, China, to give a talk on “Recent innovations in printed environmental sensors”. Memoon Sajid^1*, Kyung Hyun Choi.

C-11.     Flexible near-linear humidity sensor based on bi-layer Ti₂CN/PAM active region. (Oral) Memoon Sajid¹, Hyun Bum Kim, Soo Wan Kim, Kyung Hyun Choi^*, ICFPE 2017, Jeju, Korea.

C-10.     Advances in organic and organic/inorganic hybrid materials for electronics and photonics. (Oral) Kyung Hyun Choi^*, Memoon Sajid², Young Jin Yang, Hyun Bum Kim, Kyoung Hoan Na, IMRC 2017,Cancun, Mexico

C-09.     Fabrication of 3D printed smart key with embedded sensor and electronics using a multi-material smart 3D printer. (Poster) Soo Wan Kim, Memoon Sajid², Kyung Hyun Choi, Jong Hwan Lim, Yang Hoi Doh, Swiss-ePrint 2017, Basel, Switzerland.

C-08.     Remote monitoring of environment using multi-sensor wireless node installed on quad-copter drone. (Oral + Proceedings) Memoon Sajid¹, Young Jin Yang, Go Bum Kim, Kyung Hyun Choi^*, IEEE IRIS 2016, DOI 10.1109/IRIS.2016.8066093, Tokyo, Japan

C-07.     All printed highly stable MEH:PPV based humidity sensor. (Oral) Memoon Sajid¹, Ghayas Uddin Siddiqui, and Kyung Hyun Choi^*, ICRIET 2016, Osaka, Japan

C-06.     Two dimensional hexagonal boron nitride/polymer nanocomposite for flexible resistive switching applications. (Oral) Ghayas Uddin Siddiqui, Muqeet Rehman, Memoon Sajid³, Kyung Hyun Choi^*, ICRIET 2016, Osaka, Japan

C-05.     Relative Humidity Sensor Fabrication with PEDOT: PSS-PVA Composite on Piezoelectric Substrate Using SAW-EHDA Hybrid Thin Film Deposition. (Poster) Memoon Sajid¹, Hyun Bum Kim, Soo Wan Kim, Young Soo Kim, and Hyo Tae Kim. TICEAS 2016, Singapore

C-04.     Remote Environmental Monitoring of Nuclear Power Plant Vicinity using Wireless Sensors Network Mounted on Quad-copter Drone. (Oral) Memoon Sajid¹. International Workshop on Additive Manufacturing Technology Advancement 2015, Jeju, Korea

C-03.     Highly Sensitive Parallel Plate Type Micro-Gravure Roll-to-Roll Printed Capacitive Humidity Sensor. (Oral) Memoon Sajid¹, Yang Hoi Doh, and Kyung Hyun Choi^*. PACRIM 2015, Korea

C-02.      Fabrication of OLED with Every Layer Fabricated Through Different Printing Technique. (Oral) Memoon Sajid¹, Kyung Hyun Choi^*, Yang Hoi Doh. MCARE 2015, Jeju, Korea.

C-01.      Flexible Large Area Organic Light Emitting Diode Fabricated by Electrohydrodynamics Atomization Technique. (Poster) Kyung Hyun Choi^*, Yang-Hui Doh, Jeingdai Jo, Muhammad Zubair and Memoon Sajid⁴. 40^th Micro and Nano Engineering, MNE 2014, Switzerland.

FINAL YEAR PROJECTS SUPERVISED:

1. Design and Development of Potentiostat for Electrochemical Device Characterization (2023-2024)
2. Open Farm: Precision Agriculture Robot. The project successfully secured funding from PEC (2023-2024)
3. Radar-based Vehicle Speed Detection System. The project successfully secured funding through IGNITE NGIRI program (2022-2023)
4. Development of heated textiles for jackets and socks (FEE+FME) (2022-2023)
5. LIDAR-based Vehicle Speed Gun (2022-2023)
6. Biometric Smart Attendance System for Educational Institutes (2022-2023)
7. IoT Based Smart City Implementation (2022-2023)
8. Development of general electronics lab digital-analog trainer board for University of Swabi (2022-2023)
9. 3D Printing System with Multi-Functional Materials (FEE+FME). The project secured 3^rd position among FEE projects in 2021 Industrial Open House and Career Fare of GIK Institute. It also successfully secured funding through IGNITE NGIRI program (2021-2022)
10. Indigenous design and development of rotary inverted pendulum based linear control systems lab trainer with Simulink Interface (2021-2022)
11. IoT based poultry farm environment monitoring and control system (POULTA). The project successfully secured funding through IGNITE NGIRI program (2021-2022)
12. Rapid response medical drone service with patient monitoring system (2021-2022)
13. Design and Development of Automatic External Defibrillator (AED). The project secured 3^rd position among 2021 final year projects of the Faculty of Electrical Engineering GIKI (2021-2022)
14. Attitude control of satellites using three-axis reaction wheels (2021-2022)
15. Design and development of multi-terrain quad-legged robot (2021-2022)
16. Design and development of fully automated smart reflow oven for SMD soldering. The project got full sponsorship from industry in terms of equipment used in the project. (2021-2022)
17. IoT based smart human posture detection chair (FEE+FCSE). The project was fully funded by the industry and is targeted towards commercialization in next phase (2021-2022)
18. Design and development of SnO₂ based ammonia gas sensor (FEE+FMCE) (2021-2022)
19. Development of 3D printing system with embedded electronics (FEE+FME). The project secured 2^nd position among 2021 final year projects of the Faculty of Electrical Engineering GIKI. (2020-2021)
20. Active noise cancellation system with hybrid feedback & feed-forward control system (2020-2021)
21. Development of precise characterization systems for electrochemical devices and biosensors. The project successfully secured funding from Sapphire Textiles. (2020-2021)
22. Development of CNC based PCB fabrication and laser ablation system (2020-2021)
23. FARMOBOT: Smart agricultural robot for seed sowing and spraying. The project secured 3^rd position among 2021 final year projects of the Faculty of Electrical Engineering GIKI. (2020-2021)
24. IoT based mobile ICU and patient monitoring system. The project successfully secured funding in the form of complete equipment by national radio and telecom corporation (NRTC). (2020-2021)
25. Development of automatic media robot for cinematic applications (2020-2021)
26. Human Following Smart Platform. The project secured 1^st position among 2020 final year projects of the Faculty of Electrical Engineering GIKI. (2019-2020)
27. Precise Agriculture with UAV (Unmanned Aerial Vehicle) (FEE+FME). The project successfully secured funding through IGNITE NGIRI program (2019-2020)
28. Three DOF Platform Stabilization for Media Applications (2019-2020)
29. Coordinated Warehouse Robots with Task Optimization (2019-2020)
30. Automated Micro-Pipetting System for Medicine, Biomedical, and Chemical Industry. The project secured 1^st position among FEE projects in 2019 Industrial Open House and Career Fare of GIK Institute. It also successfully secured funding through IGNITE NGIRI program. (2018-2019)
31. Automatic Warehouse Robot for Heavy Payloads. The project secured 3^rd position among FEE projects in 2019 Industrial Open House and Career Fare of GIK Institute. It also successfully secured funding through IGNITE NGIRI program. (2018-2019)
32. Electronic Speaking Glove for Speechless Patients. The project successfully secured funding through IGNITE NGIRI program. (2018-2019)
33. Coordinated Robotic Swarm for Multi-Task Solving. (2018-2019)

COMPLETED FUNDED PROJECTS AS TEAM MEMBER:

1. Nano-encapsulation of printed electronic devices like sensors and OLEDs through A-ALD system (2016-2017): NST, CAP-15-04-KITECH.
2. Electrohydrodynamic printing process development for the repair of MEMS based devices (2016-2017): MI 802(PNT) Korea, No. 10052802.
3. Development of SAW based fault detection system for structural health monitoring of windmill blades (2015-2017): NRF-2015H1C1A1035892.
4. Design and implementation of the control system for a Wi-Fi connected 3D printer with multi-material print head (2016): NST MSIP, CRC-15-03-KIMM.
5. Multiple sensors wireless network node mounted on drone for remote monitoring of environment in nuclear power plant vicinity (2015-2017): ICT & Future Planning Korea.
6. Fabrication of flexible large area OLEDs for back panel lighting application (2014): MOTIE 10042477, Republic of Korea.
7. Differential flatness-based controller design for two span roll-to-roll system (2014): MSIP, NRF-2014R1A2A1A01007699.

ACHIEVEMENTS AND AWARDS:

1. GIK Institute “Teaching Excellence Award” for being the top instructor in the whole institute for the academic year 2019-2020
2. HEC Approved PhD Supervisor (2019)
3. Registered Engineer Pakistan Engineering Council (PEC) for lifetime
4. Award for Excellent Research Records for the year 2017 by Brain Korea Brilliant Students Program (BK21+), Ministry of Science and Technology, Korea (2018)
5. International Students Badminton Champion, Jeju National University (2016-17)
6. Research Excellence Award by the Jeju National University based on the excellent research output in Mechatronics Engineering Department after completion of course work (2016)

ADDITIONAL DUTIES AND EXPERIENCE:

1. Convener of the Faculty of Electrical Engineering Undergraduate Curriculum Affairs (2020-Present)
2. Convener of the Undergraduate Laboratories for Faculty of Electrical Engineering (2019-Present)
3. Member of the FEE Board of Studies (BoS) and Faculty Curriculum Board (FCB) (2019-Present)
4. Member of the FEE Outcome Based Education (OBE) committee, GIK Institute (2020-Present)
5. Secretary, Board of Faculty of Electrical Engineering, GIK Institute (2020-2023)
6. Advisor of the Character-Building Society (CBS), GIK Institute (2020-2024)
7. Secretary of the Faculty Club, Ghulam Ishaq Khan Institute (2020-2022)
8. Coordinator of GIK Institute Promotion/Marketing and Admissions Advertisement Committee (2021)
9. Convener of the GIK Institute CATV indigenous up-gradation committee (2022)
10. Convener of the GIK Institute indigenous automation of water pumps (2022-2023)
11. Coordinator of FEE TA/Lab engineer duties assignment (2020-Present)
12. Student Batch Advisor for Faculty of Electrical Engineering (2020 to 2023)
13. Coordinator of FEE GIKI Campus Management System (CMS) (2021)
14. Coordinator of FEE GIKI Prospectus (2021-Present)
15. Faculty trainer for the learning management system (LMS) of GIK Institute (April & Dec 2020)
16. Faculty trainer on “Best Teaching Practices” for the GIK Institute faculty members (Dec 2021, 2024)
17. Member of GIK Institute electrical equipment procurement/inspection committee (2022-Present)
18. Member of the GIK Institute 1 MW Solar Power Project Committee (2022)
19. Member of GIK Institute’s smart classrooms and digitization committee (2021)
20. Member of GIK Institute peer review committee for quality assurance (2021-Present)
21. Member of GIK Institute Store’s Condemnation & Auction Committee (2021)
22. Member of GIK Institute ethics policy development/review committee (2019)
23. Member of GIK Institute Convocation Committees (2020-2022)
24. Member of the GIK Institute Graduate Admissions Committees (2021-2024)
25. Member of the GIK Institute Undergraduate Admissions Committees (2024-Present)
26.  

Reviewer of International Journals/Conferences:

1. Nano Today (IF: 18.9) Elsevier
2. Applied Materials Today (IF: 8.7) Elsevier
3. Applied Materials & Interfaces (IF: 10.4) American Chemical Society (ACS)
4. Sensors and Actuators – B (Chemical) (IF: 9.2) Elsevier
5. International Journal of Biological Macromolecules (IF: 8.0) Elsevier
6. Journal of Science: Advanced Materials and Devices (IF: 7.4) Elsevier
7. Journal of Materials Research and Technology (IF: 6.3) Elsevier
8. Progress in Organic Coatings (IF: 6.2) Elsevier
9. Surfaces and Interfaces (IF: 6.1) Elsevier
10. Soft Matter (IF: 4.0) Royal Society of Chemistry (RSC)
11. Flexible and Printed Electronics (IF: 3.8) IOP Science
12. Measurement (IF: 5.1) Elsevier
13. IEEE Sensors Journal (IF: 4.3) IEEE
14. Biosensors (IF: 5.7) MDPI
15. IEEE Magnetics Letters (IF: 1.5) IEEE
16. Co-chair of session on “emerging topics” in the 17th International Conference on Emerging Technologies (ICET) 2022
17. Member of the Pakistan Science Foundation (PSF) Technical Committee on CRP (Competitive Research Program) to review the research projects for financial support (2021-2022)
18. IEEE International Conference on Emerging Power Technologies (ICEPT) 2021
19. 3^rd Pak-Turk International Conference ESTE 2020